User`s guide

21-0381E v4.7.3
Welcome Report Control Admin
Sys Config Tech-Ref
205
memory configuration to use with all
panels associated with this
site/account. This determines the
system capacities for this account (see
"Columns...", to follow).
Suites, Elevators: Support for suite-
security keypads and/or elevator controllers
requires a 'feature set' selection of 5
or
higher (via Enterprise software licensing).
Bell 103 Connections
: For panels that will
connect through their built-in dialler (Bell
103 300 baud modem), the feature-set
must be 1-3 (single panel system, up to 300
users). This also requires a USR Sportster
56K modem at the PC (for compatibility
with the initialization string).
-(Columns of items): This shows the
system capacities associated with your
selected "Feature Set".
Related Topic: "System Capacities".
If you cannot select a specific 'feature set', this means
that it is not supported by your software licensing.
Related Topic: "Software Activation and Licensing".
Panel Memory
: For some feature sets, panels require
additional memory (as indicated at the top of each
column).
 Setup 
Master Panel
- [Change Master Panel]: For a multi-panel
account, this identifies one panel to be
referenced for common panel settings (users,
etc.) during a "Get From Panel" database
update.
For details on transferring settings, refer to "Panel
Communications and Updates".
Global Account Options
-Allow PIN Duress: Whether or not users will
have the option (at system keypads, and
readers set for card / UID +PIN entry) to indicate
they are being forced to enter by reversing the
last two digits of their PIN. This will be logged
as a duress alarm.
- Panic Token Sends Duress
(≥V4.4): This sets
detection of panic tokens to be transmitted as a
duress alarm. (Otherwise, it will be logged
locally, but not transmitted. (Also see next
item.)
Tip: Whether or not a card/token will be treated as a
'panic token' is set in the authorities assigned to the
specific user (card/token).
-------------------------
- Display Card Number: This shows the card
number for each user (and/or hides user-ID
references) in event messages, reports, and
other locations (e.g., fallback users screen);
- Synchronize panel time daily (≥V4.5): Each
panel keeps track of time independently.
Beginning with V4.5, a selection is provided that
synchronizes all panel time clocks in an account
with the Director server PC. This occurs
overnight around 3:00 am.
For sites that include camera(s) associated with doors
and/or sensors (for "Video Events"), this 'time sync'
feature is selected automatically--and cannot be
unselected. This ensures time-stamps associated
with camera images will be synched correctly across
all cameras.
- Enable User In/Out Status for this Account:
This turns user In/Out status tracking on and off.
(Default = Enabled.) If this feature is not
needed, you can unselect it to free up Director
server resources.
Note: This selection is needed for the following
features:
+ User In/Out status tracking (in Control & Status);
+ Time & Attendance Reports;
+ Roll Call (and Instant Roll Call) reports.
- PIN Mode: Whether user-PINs (for use at
reader keypads, and system (LCD/LED)
keypads will be four or five digits long;
Notice -- "Shared Users": With users assigned
across multiple accounts ("Shared Users"; ≥V4.2
Director), the PIN Mode and User Logon Mode will be
locked here. Related Settings
:
Account Information