User`s guide

21-0381E v4.7.3
Welcome Report Control Admin Sys Config Tech-Ref
7
- [Yes]: Logs the present operator out,
and shuts down the VEREX Director
software.
- [No]: Aborts the exit request.
If you have changed any desktop settings, a
check-box will be provided to let you save
your settings.
- [Yes] (Logout): Logs the present
operator out, shutting down access to
the VEREX Director software.
(Until the next valid operator performs
a 'login'.)
- [No] (Lock
out): This shuts down the
desktop except for the status toolbar (and login
button). (Tip: If the same operator logs back in,
the software will also remember what account
they were 'in'.)
The status toolbar requires that the software be
connected with the applicable panels. For details on
using the status toolbar, or on establishing panel
communications, refer to "Checking Status and
Controlling Items"
- [Cancel]: Aborts the logout request, leaving the
present operator logged in.
If you have changed any desktop settings, a check-
box will be provided to let you save your settings.
(For a related topic, see "The Auto-Lockout Feature",
previous.)
(When Exiting)
Logout / Lockout