User`s guide

6 VEREX Director V4.73 User's Guide 21-0381E v4.7.3
Exiting, Logging Off, or Changing
Operators
Shutting Down the VEREX Director
Software
To shut down the VEREX Director softw are,
click the X in the extreme upper-right corner of
the VEREX Director screen (or open the F
ile
menu, and select E
xit).
Tip: If you changed any desktop settings, and would
like to retain them, be sure to click the check-box
provided.
Then, select "Yes" on the confirmation screen.
The RPC Server is Unavailable: This message
appears if the Director-Server application had been
shut down previously (before the Director software).
Logout or Lockout
To 'log' off, simply sele ct Logout on t he
toolbar (or open the F
ile menu, and select
L
ogout).
Tip: If you changed any desktop settings, and would
like to retain them, be sure to click the check-box
provided.
Then, select Yes to 'logout ', or No to pu t the
software in 'L ockout' mode. (See the 'Lo gout /
Lockout' screen descriptions for details.)
To protect against unauthorized access to the VEREX
Director software, it is always a good idea to use the
logout (or lockout) feature before leaving your
workstation. (For a related topic, see "The Auto-
Lockout Feature", previous.)
Changing Operators
Changing ope rators is simply a matter of one
operator logging out, and th e second operator
logging in. (For details, see previous / above.)