User`s guide

21-0381E v4.7.3
Welcome Report
Control Admin S ys Config Tech-Ref
119
Panel, or Reset APB Status for Users".
- Get from Panel: Settings at the
panel(s) will be updated into the
software. (This is useful when adding
VEREX Director to a system that was
programmed by other means, or in the
event of the VEREX Director
(software) database being accidentally
cleared —with no 'backup' copy
available.)
For a multi-panel account, settings that are
account-wide (e.g., Users, schedules, etc.)
are taken from one panel set as the "Master
Panel". This panel must therefore be
available during the transfer.
Local user admin. (via keypad) is supported
in all systems, while local system
configuration is supported only in single
panel systems set to "Feature Set" 1, 2, 3,
or 4.
The "Service PIN" can be changed only
through the VEREX Director software (the
value at the panel is ignored / over-written).
For details on "Master Panel", "Feature-Set",
or "Service PIN", refer to "Account-Wide
Panel Settings".
Schedule
- Type: Whether the connection / update is to
occur only once, or as per a rotating schedule
(hourly, daily, or weekly).
On next Call: This pertains to the next time a
connection is initiated. Tip
: This can be set up ahead
of time, allowing a technician at a new site to request
a 'remote update' once the installation is complete.
- Start Date: The date that the communications
session is to occur. (The default is 'today').
- Start Time: The time that the session is to
occur. (The default is 'now/immediate'.)
Client/server Systems: The date and time are as per
the VEREX Director server PC. If this is different
relative to your workstation, you may to need to
compensate. Director-Server PC
: This is the PC that
includes "...Director-Server.exe".
- Quick Update (≥V4.5): This sets scheduled
updates to trigger 'right-away' (once
communications is available) whenever
changes are pending for users and/or
authorities—rather than waiting until the
scheduled time.
Frequency
- Stay Connected: VEREX Director will
maintain a 'Normal' connection after
transferring or synchronizing settings, to allow
for real-time monitoring (through the
monitoring window), and checking status of
items, or controlling items (through "Control &
Status" in the tree).
Communications ÖPending/Online Ö [ Edit ]
(Communications Session Details)