User`s guide

21-0381E v4.7.3
Welcome Report
Control Admin S ys Config Tech-Ref
113
control the output is under (if any);
- [Manual Control]: Allows manually
controlling the output.
Details to follow / below.
- Timer: This shows the remaining
duration for a timed output function
that is presently in effect;
- Equation: This area shows details on
the programmed function / equation for
the output.
Controlling an Output Manually
Access the "Outputs" control & status
topic as described previously, and use
the Grid / Form toolbar -button to
select your preferred 'view'.
Forms view: Details for one item at a time;
Grid View
: All items in a list.
Select the de sired output (bottom of
the 'forms' w indow), and click
[Manual Co ntrol] near t he upper-
right corner of the form;
Then, refer to the selection-
descriptions for this scre en while
making your selection(s).
Tip: Additional parameters appear when
applicable (duration, etc.).
- Normal: No manual control (i.e.,
return to normal operation);
- Always: Allows setting the output as
On
or Off continuously (until manual control is
removed);
- Momentary: Allows setting the output to
pulse/toggle once. Additional selections will
appear for: • Whether it is to be triggered On
(high), or Off
(Low); • The state it will be left in
afterwards (Off
, On, or Normal); • How long the
relay will remain triggered (1 second to 1 week).
- Duty Cycle (1 sec. On/1 sec. off): The output
will be pulsed on and off continuously for a
selected duration (1 second to 1 week).
Control & Status ÖPanel Control & Status
ÖOutputs
Control & Status ÖPanel Control &
Status ÖOutputsÖ[Manual Control]