User`s guide

21-0381E v4.7.3
Welcome Report
Control Admin S ys Config Tech-Ref
95
- Panic Keys: This area lists the suite
security keypad's panic keys, and
shows the status of each one (i.e.,
whether or not any panic keys have
been pressed).
Note: The number of panic keys supported
depends on the type of suit security keypad
installed. For example, 2-zone keypads
support panic key #1 only (triggered by
pressing # and ∗ ).
- Output Points: This area lists the
suite security keypad's outputs, and
shows the status of each one (i.e.,
whether or not any of the outputs have
been fired).
Note: The number of programmable output
points supported depends on the type of
suit security keypad installed.
- Security Suite (bottom of form): This
is where you select a suite security
keypad to view diagnostic information.
This area shows a reference number
assigned by the system, plus the
name/description of the suite/facility as
defined under 'Configuration'.
- Security Suite Information:
Information pertaining to the selected
suite
(version number, maximum and
present baud rate, etc.)
.
- Security Suite Status: Various status
topics for the selected keypad.
- Communication Statistics: This shows
information pertaining to the module bus
communications success rate with this device
over a period of time.
- [Refresh Communication Statistics]: This
updates the screen (i.e., rechecks
communications statistics).
- [Reset Communication Statistics]: This
restarts the counters ('i.e., resets the statistics
values to zero).
Control & Status ÖPanel Control & Status
ÖSuite Security
Control & Status ÖPanel Control & Status
ÖSuite Security ÖDiagnostics