User`s guide

106 NetVision Plus/Elite and Micro DVR v2.3 SP2 User's Guide 21-0400E v2.3.3
23
Remote Configuration
NetVision's remote configuration feature allows
authorized remote users, to perform many
configuration tasks on a Video Server using
only their web-browser software (must have
access to the internet or to the Video Server
through a network--via IP).
To access this feature from any PC with
access to the internet, open your web-browser,
and then use (only) the IP address of the
Video Server in place of a web site address.
When the login screen appears, enter a
remote username and password that is
registered at the specific Video Server (with
access to this feature).
Related Topics: 11.2 Remote Users and Permissions
(includes PTZ priority +HTTP Server Port)
23.1
Available Selections
Tip: When finished selecting items on a page, click
[Submit] to have the changes take effect.
------------------------------
Motion Detection
• Allows setting up video motion-detection for
each camera associated with the specific
Video Server.
Related Topics: 18.5 Setting Up
Video Motion-Detection
Utility
The items below pertain to selections available
through the [Utility] button on the Video
Server desktop.
23.2
Camera
• Camera Setting: Allows enabling camera
numbers that are being used (de-select all
that are not in-use);
Related Topics: 16.1 Set up Cameras and Titles
23.3
Recorder Setting
• Frame Rate: Allows setting the frame rate
for various types of recordings (up to 30
frames/second);
Related Topics: 17.4 Frame Rate for Recording
• Alarm: Allows setting up external inputs
(sensors) that can trigger recordings, plus
setting up the pre-alarm recording feature;
Related Topics:
18.3 External Sensors and Recording Duration;
18.4 Setting up Pre-Alarm Recording
• Recording Planner: Allows setting up the
times for scheduled recording and/or
scheduled motion-triggered recordings.
Related Topics: 18.2 Schedules for Recording and/or
Motion Detection
Note: This allows working with one camera at a
time (select the camera first). To set a block of time
for a scheduled recording, click the starting time
and then the end-time within the green bar. For
scheduled motion detection times, use the red bar
(Default: All Days/times). For schedules to take
effect on different day(s), click [Save As...] and
select the weekday or specific date (click the [T] to
access a pop-up calendar).
23.4
Option
• Sequence Setting: Allows setting the
cameras to appear in sequential viewing;
Related Topics:
16.2 Cameras to Appear in Sequential Viewing
• Recording: Allows setting the resolution for
recording, plus the recording mode;
Related Topics:
17.3 Resolution and Recording Mode
• Operation Setting: Allows setting various
start-up/logoff operating parameters;
Related Topics: 14.1 Startup / Logoff Options
• Password: Allows changing the Video
Server passwords (i.e., for the "Super" and
"Operator" login);
Related Topics:
11.1 Video Server Users and Passwords
• Audio Setting: Allows enabling audio
support for cameras. (Current servers
include up to 5 audio inputs.)
Related Topics: 16.5 Enable Audio for Specific
Cameras