Specifications

4 SiteWatch™ User and Technical Guide
21-0402E v1.1.3
− “Acknowledge Event” – An event or events can be highlighted and acknowledged by pressing this
button. This will clear the event.
− “Acknowledge All Events” – This will clear the event window. Only new events will be displayed.
• Status and Date/Time event particulars at the top of the activities display area are actually sorting
buttons:
− Pressing each button will sort the particular information in an ascending or descending order and an up
or down arrow will display on the right of the selected button to indicate the direction of the order.
Category Buttons:
− Status – current state of the fault.
− Date/Time – when the occurrence happened.
− Station – NetVision PC with fault.
− Event – type of fault, camera etc.
− Camera – the camera number reporting
− Details – what kind of fault.
• A special event is the red circle clock. It represents that a response from a station has “timed out”.
− NOTE: A “timed out” event appears when a capture station has failed to communicate 15 minutes
after it is scheduled to.
Responding to Alerts
• Activities appearing as they happen in the event area and similarly showing up in the Station’s
tree are treated as alerts for operators to respond to. They would notify the designated
personnel as necessary; to check the fault and restore it.
• The Status Bar at the very bottom of the main screen displays the systems current activities.