Specifications

21-0402E v1.1.3 SiteWatch™ User and Technical Guide 7
• Viewing a Station’s Features: Pressing the plus (+) symbol next to stations in the tree will display the
station’s features:
•
Cameras. Selecting Cameras will open another tree box between the existing one and the
configuration box on the right. Cameras can be selected individually. Pressing the plus (+) symbol
next to a camera will display its Last Capture Rate and Video Signal in this tree. A “Recording
Failure” may also appear for the camera if there was no recording detected in the time specified in
the “Check Recording” box in the NetVision Station/Configuration screen. ATM / POS Connectivity
will also display if it has been enabled. A white x in a red circle before e.g. a camera or ATM indicates
it is not communicating
properly.
When a camera is
selected, the right
configuration box will
display 3 selection tabs.
Each tab pressed will
display a camera’s settings
for viewing only. These
settings are adjustable at
the Netvision Station itself.
Camera
Configuration
− (Title): e.g. Camera 01,
Sequencing: e.g. “On”, Card
Number: e.g. 0 [0..3],
Channel: e.g. 0 [0..3].
− On Site, Enable ATM/POS: A check box to
enable Automatic Banking / Point Of Sale:
Interac
®.
ATM connectivity NOTE: If the ATM is
operational, a transaction occurred in the last 24
hours. If it is not operational, there were no
transactions in the last 24 hours.
− Last Snapshot – displays the camera’s most
recent view with date and time.
- VIDEO ONLINE EVENTS
- Netvision System has to be in View Mode
(log on) and Active property set to “true”.
Settings
− Last User Logon: e.g. SUPERVISOR,
− Record Resolutuion: e.g. High,
− Recording Mode: e.g. Circular,
− Dwell Time: e.g. 2 [1..120sec],
− Display Time Format: e.g. 12-hour format,
− Continue Display at Logoff: e.g. Off,
− Status Retain: e.g. Off,
− Continue Recording at Logoff: e.g. Off,
− Continue PTZ Control at Logoff: e.g. Off.
Recorder
− Frame Rate: (For Instant, Alarm, Scheduled) --
[frame/sec]
− Pre Alarm: e.g. Off, Pre Alarm Record Length:
e.g. 5 [0.60 sec].
− External Alarm Input: Status, Length
(duration) -- [1..600 sec], Normally Open
(Y/N).
− Audio Channel: e.g. No selection (no audio).
•
Storage. Selecting a Station’s “Storage”
feature will display the SiteWatch NetVision
Drive in use, Storage Available (MB), Disk
Size (MB) and the Percentage Used.