User`s guide

72 Guardall Director V4.74 User's Guide 21-0381E v4.7.4
Alternative: You can also set the 'tree' to
list status topics on a panel-by-panel basis.
For details, refer to "Other Desktop
Choices".
Anti-Passback
- [Anti-Passback Reset]: This opens a
small screen that allows resetting the
antipassback status for a single user,
or all users for doors associated with
selected panel(s).
-User: This allows selecting a specific
user, or "All Users" to have their
antipassback status reset at the
selected panel(s).
Anti-Passback Settings
These choices allow you to select the panels
associated with the user APB status-reset
(for systems that have more than one
panel). (If you have only one panel, these
settings all have the same effect.)
- All Panels in this Account: This will reset the
antipassback status for all panels in your
presently-selected account.
- All Panels in this Panel Group: This will reset
the antipassback status for your selected panel,
plus any others that communicate through the
same cable or remote modem.
- Just this Panel: This will reset the antipassback
status for your selected panel only.
Clearing a "Bad Card/PIN Global
Lockout"
Global User Lockouts
The 'Bad Card/PIN' tracking feature helps to
prevent unauthorized persons 'hacking' their
way into a controlled area. All users can be
locked out automatically if a lot of invalid cards
and/or PINs are detected during a set time.
Related:  Account Information Bad Card/PIN;
 Configuration Areas Access "Bad Card
Action"
The [Clear User Lockout] button allows
clearing the lockout, so all authorized persons
can enter as usual.
Clearing a Global User Lockout
Initiate a connection with the panel(s), and
access the "System" Control & Status topic as
described previously/above.
Multi-Panel Systems: Select the desired panel at the
bottom of the form (if not shown/selected in the 'tree').
If the status screen is blank or inactive (or if you'd like
more information), refer to "Accessing the Control and
Status Topics for a Panel" (under "Checking Status &
Controlling Items", previous).
Then, click [Clear User Lockout], and watch
for the status indicator to change.
- Panel (bottom of the form): This is where you
select a desired panel (for systems with more
than one).
Alternative: You can also set the 'tree' to list status
topics on a panel-by-panel basis. For details, refer to
"Other Desktop Choices".
User Status
- [Clear User Lockout]: This allows resetting a
"Global User Lockout" triggered by the 'Bad
Card/PIN' tacking feature.
- Global User Lockout: This shows whether or
not a 'Global User Lockout' is presently in effect.
Related:  Account Information Bad Card/PIN
Control & Status Panel Control & Status
System [Clear User Lockout]