User`s guide

21-0381E v4.7.4
Welcome Report
Control Admin Sys Config Tech-Ref
53
- (+) / (
- ) (magnifying glass symbols) and
the 'slider bar' on the right edge of the
screen
: These allow zooming in or out
on a selected map.
To show or Hide the Slider Bar: Right-click
a blank area on the map. Then select
"View", and "Show Zoom Slider" from the
pop-up menu.
Viewing the Status of an Area or
Device
Open the applicable "View", and
(locate) and select the desired device
(Details: Previous/above)
.
Then, 'hover' your mouse cursor on top of the
item, and watch for a pop-up status screen.
Jumping to the Control & Status Form: Right-click the
area or device and select "Switch to Control & Status
Screen for this Item" from the pop-up menu.
Various status aspects will be shown for the
specific area or device. If you require more
information on the listed information, look for an
applicable topic under "Checking Status &
Controlling Items".
User's Guide: Look in the table of
contents near the front of the manual.
On-Line Help
: Open the Help menu, and
select "Topics" (and ensure the Contents
tab is selected). If the Help is already
open, select [Topics], and then the
Contents tab.
Item Legend
An Area (including all associated devices);
A Door and associated reader(s);
An Input Point (sensor);
An Output Point (electronically triggered device);
An Expansion Module;
An Elevator (lift) and associated reader;
A Suite-Security Keypad;
A link to a live camera, or another Map.
Flashing Green Box: This indicates a 'selected' item on a
map. (This pertains to navigating using the browse buttons at
the bottom of the screen.)
To show or Hide Item-Names on a Map
: Right-click a blank
area on the map. Then select "View", and "Show Item Text"
from the pop-up menu.
Area and Device Status (Mouse hovered over an item)