User`s guide

21-0381E v4.7.4
Welcome
Report Control Admin Sys Config Tech-Ref
39
any of the selected door(s). The last 1, 4, or 9
entrant's photos can be displayed.
The photo can then be used to verify each
entrant's identity. This can be done locally--
such as by an attendant in a reception area, or
remotely through a camera on a map.
This feature is configurable separately for each
operator (as described in a following section/below).
This pertains to the photo associated with
each card/person in the "Users" screen.
For details, see "The Photo-Badging
Option".
Connecting to the Associated Panel(s),
A
n Overview:
This feature works only while you are
communicating with the specific panel(s). To
establish a connection:
1) See if you're already connected by
checking the status bar at the bottom of
the monitoring window.
Multi-account systems: Ensure your desired
account is selected (click [Account Folders] in the
tree, and then double-click the specific account).
2) If not connected, check to ensure the
communication software is running on the
specific PCs.
Detail: If the LCD/Telephone icon on the Windows
taskbar is black-and-white (colour = running), start
the communications service by right-clicking the
icon, and selecting "Start Communications".
Related Topic
: Serial Port / Modem Setup
(Communications Manager)
3) Select Communications from your
MyTools bar, or
click [Communications]
in the 'tree', and select Pending/OnLine.
4) Click the [+] at the bottom of the form, or
right-click the form, and select Add New
from the pop-up menu. Then, select the
desired panel(s) (double-click to select),
and set "Action" to "Normal", and
"Frequency" to "Stay Connected" ().
(Click OK when finished.)
5) Check that the connection is made, and
watch for the panel updates to occur.
(Click the 'Panel Group', and look for the status on
the right side of the screen.)
Note: The photo-verification feature will be available
after
the panel updates finish (look for a connection
state of 'Connected' and 'Idle State'.)
Also See (Related Topics):
+ "Panel Communications and Updates"
Using This Feature
The photo window opens automatically
whenever a person gains access at the
specific door.
Multi-Account Systems: This works only while the
specific account is selected. (Click [Account Folders]
in the 'tree', and double-click the specific account.)
You can also open the photo window manually
by clicking [Show Photo] at the bottom of the
monitoring window.
Window Empty: The photo window is cleared each time
settings are changed for this feature, and when you
select anything outside of the specific account.
Now, visually compare the displayed photo
with the person to verify their identity.
Setting the Window Position
To reposition the photo window, simply click-
and-drag its title-bar to the new location.
Closing the Photo Window
To close the photo window at any time, click
the [X] in the upper-right corner.