User`s guide

21-0381E v4.7.4
Welcome Report Control Admin Sys Config
Tech-Ref
253
Activation Key: The Guardall Director software uses a small 'activation key' to
manage software licensing and optional features. This device must be plugged
onto the PC that contains the software database (V4: USB connector; V3.3.2:
Parallel/printer port; V3.3.3: Either).
Note: Director software V4 will not start up if the USB key is missing.
Activating Your Software
The Director USB Security Key or “HASP” must be registered or the Director Program will stop
operating!
Your software (activation key) comes pre-enabled to operate for 90 days with standard features.
For additional features, client-server operation, or extended duration, you must run the license-manager program.
Attention:
License validations cannot be done over the phone. As well, for sites with NO access to the internet,
software activation keys must be registered ahead of time. For details, see “If you Have Access to the Internet from
a Different PC Only”, to follow/below.
Dealer Code and Password
Before you begin, you will need a Dealer code and password that must be entered in the
Licensing Manager’s Registration Information.
The Dealer code and password can be obtained from Guardall by calling +1 905.206.8436.
Please perform the following procedures to obtain a new validation key number and register
the security key.
 After the Director program has been installed, run the version 4 License Manager program
(Director Server PC if client-server):
[Start]  Programs  Guardall Director V4  Guardall Director – License Manager.
 The “Information” screen will open supplying a list of system features that are enabled or not enabled
that were included with the system.
 The “Registration” screen will display. Enter the information beginning with the Dealer Code.