User`s guide

21-0381E v4.7.4
Welcome Report Control Admin Sys Config
Tech-Ref
251
CD-R, etc., and then transfer it to the
new PC (any suitable folder);
3) Install the (new) Director software on
the new PC
(including generating a default
database)
;
4) Perform a database restoral;
QuickRef: Guardall Director-Repair.exe
Backup/Restore [ Restore Database ].
Related Topic
: Reverting to (Restoring) a
Backup Copy of the Guardall Director Database
Notice: Do NOT start the Director software yet.
5) Convert the restored database for use
with the new software.
QuickRef: Guardall Director-DB Convert.exe.
Related Topic
: See step #4 under "Upgrading
from an Earlier Version of Software",
previous/above.
-------------------------------------------------------
-------------------------------------------------------
If Not Upgrading
: If you are transferring
your existing version of Guardall Director
(v3
.3) to a different PC, perform the
following steps:
1) Perform a backup with the existing
Director software.
QuickRef: Guardall Director-Repair.exe
Backup/Restore [ Backup Database ].
Related Topic
: Backing up or Restoring the
Database
2) Copy the backup (BAK file) to
somewhere on your network, or onto a
CD-R, etc., and then transfer it to the
new PC (any suitable folder);
3) Install the Director software on the new
PC
(including generating a default 4)
A Director.XDF file was created
during the installation. Copy this file to
the folder that contains your transferred
BAK file.
Source XDF file location:
 Windows XP
: C:\Documents and
Settings\All Users\Application Data\Director,
or
;
C:\Documents and Settings\All
Users.Windows\Application Data\Director
5) Perform a database restoral using the
existing Director software;
QuickRef: Guardall Director-Repair.exe
Backup/Restore [ Restore Database ].
Related Topic
: Reverting to (Restoring) a
Backup Copy of the Guardall Director Database