User manual

126 •
••
• 6 - Programming Simatic 505 SoftShop
Online Password Operations Table
Mode
No.
Controller
Password
Offline
Password
User
Password
Save
Allowed to
Disk?
Open
Allowed to
PLC?
Comments
1No No Not asked
for.
Yes. No
password.
Yes. No
password.
Selected program on disk
must have 5.0 format or
greater. There is no
password for selected
program on disk or in the
controller.
2 No Yes User gives
password
for selected
program on
disk.
Yes. Selected
program on
disk
password is
retained.
Yes. Disk
password is
written to
controller,
if controller
supports
password.
Full access to controller
and selected program on
disk is allowed.
3 No Yes User does
not give
password
for program
on disk.
No. Selected
program on
disk is
password
protected.
Only if
controller
supports
password.
Full access to controller is
allowed. Some reads and
no writes are allowed to
selected program on disk.
4 Yes No User gives
controller
password.
Yes.
Controller
password is
written to
disk.
Yes.
Controller
password is
retained.
Full access to controller
and to selected program
on disk is allowed.
5 Yes No User does
not give a
password.
No.
Controller is
password
protected.
No.
Controller
is password
protected.
Partial to full access to
controller is allowed
depending on access level.
Full access is allowed to
selected program on disk.
6 Yes Yes User gives
disk and
controller
password.
Yes. Selected
program on
disk
password is
retained.
Yes.
Controller
password is
retained.
Full access to selected
program on disk and to
controller is allowed.
7 Yes Yes User gives
disk
password.
No.
Controller is
password
protected.
No.
Controller
is password
protected.
Partial to full access to
controller is allowed
depending on access level.
Full access is allowed to
selected program on disk.
8 Yes Yes User gives
controller
password.
No. Selected
program on
disk is
password
protected.
Yes.
Selected
program on
disk
password is
written to
controller
and
enabled.
Full access to controller is
allowed. Some reads and
no writes are allowed to
selected program on disk.
9 Yes Yes User gives
no
password.
No. No. Partial to full access to
controller is allowed
depending on access level.
Some reads and no writes
are allowed to selected
program on disk.