Instruction manual

www.cs-instruments.com
43
DS 300 –
sophisticated operational concept
Main menu
Logger operation
Set Alarm 1
Set Alarm 2
System status and setting
Sensor setting
Menu logger operation
Set logging rate
Key start
Time start
Logger memory
View protocol
Format logger
Sensor setting consumption
Adjust inner diameter
Total consumption counter
Volume flow unit
Consumption unit
DS 300 convinces due to its sophisticated
operational concept which is similar to the
self-explanatory operation of modern
mobile phones.
By using the <Enter> key the user
enters the menus,
by using the <Back> key each step can be
cancelled. Selection is done by the
<arrow up> and <arrow down> key.
All important parameters can be set on-site
via the keypad.
Enter threshold value alarm relay 1 (not in case of DS 300 mobile version)
Enter threshold value alarm relay 2 (not in case of DS 300 mobile version)
Set date / time
The measuring rate can be freely adjusted between 1 second up to 59 minutes 59 seconds
Logger starts at the push of a button / stops at the push of a button
Logger starts at a defined date / time
Shows the available recording time in hours, minutes
Retrieving of stored protocols with Min, Max, average values
Deletion of the whole memory content
Inner diameter freely adjustable. Important for calculation in m
3
/h
Reset of total consumption counter to zero
Volume flow unit freely selectable: m
3
/h, m
3
/min, l/min, l/s, cfm
Consumption unit: m
3
, l, c
Consumption