Datasheet

Document NO.: WI-FHF- CS-SBA015SL-A Page 8of 9
MODEL: CS-SBA015SL
REV : A/1
Date : 03 Jun 2017
4. Protection Capability Test Method and Request
保护性能检测与要求
Item
项目
Test Method
检测方法
Request
要求
1
Overcharge Test
过充测试
Apply 2 times than rated battery voltage
and a 2C charge current on the battery
for 8hs.
用恒压源持续加载 8hs，恒流恒压源电压设
定为 2 倍电池标称电压，电流设定为 2C 的
外接电流
Battery could not be burst, burn, leak
and smoke
电池应不爆炸、不起火、不冒烟或漏液
2
Over discharge
Test
过放测试
Discharge the battery at 1C to cut off
voltage，then discharge with loading 30
Ω for 24hs.
以 1C 放电至终止电压后外接 30Ω负载放电
24H
Battery could not be burst, burn, leak
and smoke
电池应不爆炸. 不起火. 不冒烟或漏液
3
Pack Short-circuit
Protection
短路保护
1) The battery is charged to rated
capacity.
按标称容量充电方法将电池充饱电.
2) The battery is to be short-circuited
by connecting the positive and
negative terminals of the battery
with thermocouple having a maximum
resistance load of 0.3Ω
将接有热电偶的电池置于通风橱中，将
电池正负极用 0.3Ω电阻器持续短路。
Battery could not be burst, burn, leak
and smoke After charging.
电池应不爆炸、不起火、不冒烟或漏液；
5. Cell（电芯）
1) Chem : Ni-MH Cell
类别 : 镍氢电芯
2) Spec : AAP*2/2.4V/1500mAh （FB）沣标 2S1P（2串1并）
3) 规格 : AAP*2/2.4V/1500mAh （FB）沣标 2S1P（2串1并）
6. OUTLINE(外观尺寸):
L=53.00 (+0/-0.50mm)
W=28.70 (+0/-0.50mm)
H=16.38 (+0/-0.50mm)