Datasheet

Document NO.: WI-FHF-CS-SBA150SL -A Page 5of 9
MODEL: CS-SBA150SL
REV : A/1
Date : 02 Jun 2017
测试电池为用户收到后不超过 1 个月的产品.
3.1.2 Testing Environment(测试环境):
Temperature (温度): 15℃--25℃
Relative Humidity(相对湿度): 45%--85%
Atmospheric Pressure(大气压力): 86kPa--106kPa
3.2 Testing Instrument(测试工具):
3.2.1 Voltage meter 0.5 grade or more regulated by IEC 51/IEC 485, more than 10KΩ/V
internal resistance
电压计 IEC 51/IEC 485 所规定的 0.5 级或以上, 内阻大于 10KΩ/V
3.2.2 Current meter 0.5 grade or more regulated by IEC 51/IEC 485, include wire
resistance less than 0.01Ω.
电流计 IEC 51/IEC 485 所规定的 0.5 级或以上, 包括引线总电阻小于 0.01Ω.
3.2.3 Calipers Definition 0.02mm
卡尺 精确度 0.02mm
3.2.4 Internal Resistance Meter AC 1KHz 4 terminal measure setting.
内阻仪 交流 1KHz 4 端子测量装置.
3.2.5 Load Resistance Include external circuitry, allowed resistance figure
error is ±5%.
负载电阻 包括外部线路,电阻值允许误差为±5%.
3.2.6 Finished Battery Product Testing Machine
成品电池测试仪
3.3 . Test method and request(检测方法与要求)
Item
项 目
Test Method
检测方法
Request
要 求
1
Appearance
外 观
By sight：30CM vertically
目测：垂直 30CM
Case appearance should be smooth w/o
nick, burr and other mechanical damage.
Exposed metallic part should not be
Oxidized. Case should not be distorted.
外壳表面应平整无划痕、毛刺及其他机械损
伤,外露金属部分不应有氧化现象、胶壳不
能变形.
2
Insulation Resistance
绝缘电阻
Test the external packing of battery and
insulation between poles using
insulation-meter
用兆欧表测量电池外包装及电极之间的绝缘度
More than 10MΩ
大于 10MΩ