Datasheet

ManualsBrandsCS CAMERON SINO ManualsAppliance BatteriesHeadphones battery replaces original battery BA150, BA151, BA152

Document NO.: WI-FHF-CS-SBA150SL -A Page 1of 9

MODEL: CS-SBA150SL

REV : A/1

Date : 02 Jun 2017

Ni-MH Battery Specification

镍氢电池产品承认书

Project Name 产品名称：Ni-MH battery

CS-SBA150SL 2.4V/60mAh

Replace Model: CS-SBA150SL

CAMERON SINO TECHNOLOGY LIMITED

Unit 6-7,11F, Ho Lik Centre,66A Sha Tsui Road,Tsuen

WAN, Hong Kong

Tel: +852-2426 9811 3575 8109

Fax:+852 24262911

Authorized Signature &

Company Chop

客户认可及签回

Rev:A1

Prepared

制作

Checked

确认

Approved

核准

Summary of content (9 pages)

PAGE 1
Document NO.: WI-FHF-CS-SBA150SL -A Page 1of 9 MODEL: CS-SBA150SL REV : A/1 Date : 02 Jun 2017 Ni-MH Battery Specification 镍氢电池产品承认书 Project Name 产品名称：Ni-MH battery CS-SBA150SL 2.
PAGE 2
Document NO.: WI-FHF-CS-SBA150SL -A Page 2of 9 MODEL: CS-SBA150SL REV : A/1 Date : 02 Jun 2017 TABLE OF CONTENTS 目录 1. PREFACE 序言 ................................................................... 3 2. TECHNICAL FEATURES 技术参数 .................................................... 4 3. TEST 测试 ...................................................................... 5 4. PROTECTION CAPABILITY TEST METHODAND REQUEST 保护性能检测与要求 ................ 8 5. CELL 电芯 .............................................
PAGE 3
Document NO.: WI-FHF-CS-SBA150SL -A Page 3of 9 MODEL: CS-SBA150SL REV : A/1 Date : 02 Jun 2017 1. PREFACE 序言 SCOPE（使用范围） Name（名称）: Ni-MH battery（镍氢电池） Model（型号）: CS-SBA150SL Spec（规格）: 2.4V/60mAh Edition（版本）: A/1 This product approval sheet has 9 pages (include the first page) 本产品承认书共 9 页(含首页). This product approval sheet includes technical features, testing method, external connection graph, packing and so on. 本产品承认书包含:技术参数,检测方式,外形尺寸图外部连接图,包装等.
PAGE 4
Document NO.: WI-FHF-CS-SBA150SL -A Page 4of 9 MODEL: CS-SBA150SL REV : A/1 Date : 02 Jun 2017 2.Technical Features 技术参数 Item 项目 1.1 Rated Voltage 额定电压 1.2 Discharge Cut-off Voltage 放电终止电压 1.3 Rated Capacity 额定容量 1.6 Standard Charge Current 标准充电电流 1.7 Quick Charge Current 快速充电电流 1.8 Max Discharge Current 最大放电电流 1.9 Initial Internal Resistance 总内阻 1.10 Weight Per Battery 单体电池重量性 Note 能备注 2.4V 1.6V 0.2C Discharge 60mAh 0.2C 放电 12mA 0.2C 30mA 0.5C 60mA -20˚C - +55˚C / ≤9.
PAGE 5
Document NO.: WI-FHF-CS-SBA150SL -A Page 5of 9 MODEL: CS-SBA150SL REV : A/1 Date : 02 Jun 2017 测试电池为用户收到后不超过 1 个月的产品. 3.1.2 Testing Environment(测试环境): Temperature (温度): 15℃--25℃ Relative Humidity(相对湿度): 45%--85% Atmospheric Pressure(大气压力): 86kPa--106kPa 3.2 Testing Instrument(测试工具): 3.2.1 Voltage meter 0.5 grade or more regulated by IEC 51/IEC 485, more than 10KΩ/V internal resistance 电压计 IEC 51/IEC 485 所规定的 0.5 级或以上, 内阻大于 10KΩ/V 3.2.2 Current meter 0.
PAGE 6
Internal Resistance 3 内阻 Document NO.: WI-FHF-CS-SBA150SL -A Page 6of 9 MODEL: CS-SBA150SL REV : A/1 Date : 02 Jun 2017 AC testing method. In half capacity condition, using AC 1kHz testing method to measure the internal resistance figure between poles in battery connector. / 交流测试法,半容量状态下,使用 AC 1kHz 检测方法,测量电池接口处正负极之间的内阻. 1) Use nominal capacity charging method full charge the battery. 4 Discharging 按标称容量充电方法将电池充饱电. 放电平台 2) 1C constant current discharge to 1.
PAGE 7
Document NO.: WI-FHF-CS-SBA150SL -A Page 7of 9 MODEL: CS-SBA150SL REV : A/1 Date : 02 Jun 2017 1） Battery should not be leak, 9 Fall Proof Capability 抗跌落性能 smoke and burst. 电池应不漏液、不冒烟、不爆炸 Hang the battery in one meter high in the air. 2) After test, 1C capacity should Let the cells fall down by six sides be no less than 95% of it 将电池悬空在 1 米高处，将电芯自由跌 (Anode and Cathode side，crosswise sides） before test. Internal 1 time each，all together 6 times.
PAGE 8
2 3 Over discharge Test 过放测试 Pack Short-circuit Protection 短路保护 Document NO.: WI-FHF-CS-SBA150SL -A Page 8of 9 MODEL: CS-SBA150SL REV : A/1 Date : 02 Jun 2017 Discharge the battery at 1C to cut off voltage，then discharge with loading 30 Ω for 24hs. 以 1C 放电至终止电压后外接 30Ω负载放电 24H 1) The battery is charged to rated capacity. 按标称容量充电方法将电池充饱电. 2) The battery is to be short-circuited by connecting the positive and negative terminals of the battery with thermocouple having a maximum resistance load of 0.
PAGE 9
Document NO.: WI-FHF-CS-SBA150SL -A Page 9of 9 MODEL: CS-SBA150SL REV : A/1 Date : 02 Jun 2017 P- P- 是充放电负极 P+ 是充放电正极 7. Packing（包装） Packing method, as the customer required.