Instructions / Assembly

All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
ASSEMBLY INSTRUCTION
You will need 3-Cand.BULB
60 watts Max Bulb not included
USE LED BULBS FOR EXTENDED USE
®
MODEL #BEL-A8065-GE
18.4″
12″x12″
Front view
Sketch Map
2
2
1
1
Glass
Screw
Nut
3
Glass
How to Install
1.Attach the fixture to the outlet box
2.Install the bulb onto the socket
L-shaped
metal strap
How to change glass
1.Take the bottom cage down by removing
the cap nuts on the top of it.
2.Remove the L-shaped metal strap by
unscrewing the screws.
4.Put the new glass panel on and secure it
with the L-shaped metal strap and screws.
3.If necessary, smooth out the silicone glue along
the glass channel, prior to placing in the new
glass panel.