Instructions / Assembly

How to Install
1. Remove the bottom frame from the top
frame by loosening the 4 flat head screws.
2. Install the mounting plate onto the outlet box
using the two outlet box screws.
3. Place the top frame over the mounting plate
and secure with the screws.
4. Place the glass shade inside the bottom
frame and secure with the clips.
5. Install the bulb onto the socket. Raise the
bottom frame up to the top frame and align
the holes on them.While one person hold
the frame, the other person tightens the
screws using a screwdriver(not provided)
C
U
Electrical Danger
Turn Power off
installed by a licensed electrician
in accordance with the National
All electrical components must be
Electric Code and the appropriate
local electrical codes.
You will need 1- Med.Bulb
60 Watts Recommended 100Watts Max.
USE LED BULBS FOR EXTENDED USE
THIS FIXTURE IS WET RATED
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #ATL-702-MK-TG
WARNING:
This product can expose you to Lead
which is known to the state of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
Crystorama.com