Installation Sheet

LIGHTING THE WAY FOR SIXTY YEARS
CRYST
WARNING:
Turn Power Off
Electrical Danger
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
RAMA
ASSEMBLY INSTRUCTION MODEL #WAT-B2006-PN
How to Install
1. Determine correct length of stem
needed for hanging height. Screw the
stem on the body and canopy.
2.Attach mounting plate to the outlet
box using box screws.
3. Connect the fixture wires to the
supply wires.
4. Mount the fixture to the outlet box
with ball nuts.
5. Carefully insert the crystal bars into
the cup holder as per illustration
below. (A magnet is glued onto bottom
of crystal bar to make tight contact
with the cup holder)
6. Install the bulb (Not included) in
accordance with the fixture’s
specifications. (DO NOT EXCEED
THE MAXIMUM WATTAGE RATING!)
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
CSA532706DBMR1
You will need 6 - Candelabra Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
42"
9 7/8"
16" - 46"
15 3/4" x 4 1/4"
C2
C3 C3C1 C1 C3C3C3 C3C2
C2
C1C1
C2
C2
C3
C2
C2
C3
C2
C3 C3C1 C1 C3C3C3 C3C2
C2
C1C1
7/8"