Installation Sheet

MODEL#: GLA-9705-BC
ASSEMBLY INSTRUCTIONS
WARNING:
Electrical Danger
Turn Power Off
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
U
L
R
C
2017-09-20
You will need 3 – Med.Bulb
40 Watts Recommended
60 Watts Max
USE LED BULBS FOR EXTENDED USE
California T24 JA8-2016 Qualified: Satco
(S9612); 10.5 watt LED Medium Base
recommended. Bulb not included
95 Cantiague Rock Road , Westbury, NY 11590 • toll free: 1.800.888.4470 fax: [phone] • [e-mail] • www.crystorama.com
Assembly:
1. To install glass panels, separate the Bottom Cage (7) and the Top Cage (1), by removing the Decorative Nut (8).
2. Bend glass Clip (5) and slide Glass #1(3) into the Top Cage (1) and Glass # 2(6) into the Bottom Cage (7).
3. Bend glass Clip (5) to secure Glass # 1(3) and Glass # 2(6)
4. Install the bulb (4) to the socket (2).
5. Connect the Bottom Cage (7) and the Top Cage (1), by screwing in Decorative Nut (8) to secure cage.
6. The canopy of the fixture can now be mounted to the ceiling by following instruction Drawing 2.
Replacement Glass installation:
1 .Follow instructions # 1 through # 3 above to install new glass. Complete by connecting the Bottom Cage (7) and the Top Cage (1)
by screwing in Decorative Nut (8) to secure cage.
Bulb replacement:
1. Separate the Bottom Cage (7) and the Top Cage (1), by removing Decorative Nut (8).
2. Install the bulb (4) into the socket
3. Complete by connecting the Bottom Cage (7) and the Top Cage (1) by screwing in Decorative Nut (8) to secure cage.
After securing fixture to the ceiling it is
recommended that the gap between the ceiling and the canopy be sealed on
the top and both sides, with a good quality
waterproof caulk or silicone sealant (NOT INCLUDED)