Installation Sheet

Part Number
Part Numbers
A.Mounting Hardware
(1)Mounting Plate
(1)Backplate;6″x5″
(3)Wire Nut
(3)Outlet Box Screws
(4)Anchor Screw
A
B
C
D
E
F
G
H
B.(1)Shade;9.5″x5.5″x6.2″h;XMO8892AGSHA9.5IN
C.(1)Candle Sleeve;Ø1″x3.2″h;XMO8892AGCDL3.2IN
D.(1)Crystal ball;Ø1.89″
E.(1)Crystal ball;Ø1.58″
F.(1)Crystal ball;Ø1.26″
G.(1)Crystal ball;Ø0.95″
H.(1)Metal Finial;Ø0.79″;XMO8892AGFIN
PART NUMBER
MODEL #CLO-8892-AG
x4 x3
Anchor Screw
Wire Nut
Outlet Box Screws
Wire Nut
Anchor Screw
1.Put the mounting plate over the outlet box and mark the 4 points on the
wall surface at the center of 4 holes on the mounting plate.
2.Drill 4 holes at the marked points and insert the wall anchors.
3.Place the mounting plate over the outlet box and secure it with outlet
screws.Insert the wall anchor screws inside the wall anchors and tighten it.
For installation of mounting plate: