Installation Sheet

Table Of Contents

LIGHTING THE WAY FOR SIXTY YEARS

CRYST

WARNING:

Turn Power Off

Electrical Danger

All electrical components must be

installed by a licensed electrician

in accordance with the National

Electric Code and the appropriate

local electrical codes.

3" 8"

Ø6 1/4"

You will need 1 - Medium Bulb

40 Watts Recommended 60 Watts Max.

USE LED BULBS FOR EXTENDED USE

RAMA

ASSEMBLY INSTRUCTION MODEL #7401-BU

How to Install

1. Attach mounting plate to the junction

box using box screws.

2. Connect the fixture wires to the

supply wires.

3. Mount the fixture to the junction box

with ball nuts.

4. Place glass over socket and secure

with ring.

5. Install the bulb (Not included) in

accordance with the fixture’s

specifications. (DO NOT EXCEED

THE MAXIMUM WATTAGE RATING!)

WARNING: This product can expose you to Lead,

which is known to the State of California to cause cancer

and/or birth defects or reproductive harm. For more

information go to www.P65Warnings.ca.gov

CSA402001WAMR1

PAGE 1
CRYST RAMA LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL #7401-BU WARNING: Electrical Danger Turn Power Off 8" All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. 3" You will need 1 - Medium Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE How to Install 1. Attach mounting plate to the junction box using box screws. 2.
PAGE 2
CRYST RAMA LIGHTING THE WAY FOR SIXTY YEARS PART NUMBER MODEL #7401-BU Part Number Part Numbers A. Mounting Hardware (2) - Wire connector (1) - Mounting Plate (2) - Box Screws (1) - Grounding Screw B. (2) - Ball Nuts; XVE7401BUBANUT C. (1) - Ring D. (1) - Glass Ø6" 42mm hole; XVE7401BUGLA4.