Installation Sheet

LIGHTING THE WAY FOR SIXTY YEARS
CRYST
WARNING:
Turn Power Off
Electrical Danger
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
RAMA
ASSEMBLY INSTRUCTION MODEL #6768-DT
How to Install
1. Attach mounting plate to the outlet
box using box screws. Thread nipple
into mounting plate and secure with
nut.
2. Slide collar ring and canopy over
chain. Thread screw collar onto the
nipple.
3. Connect chain to the screw collar
with quick link. Connect chain to the
loop with another quick link.
4. Feed wires up through chain and
pass wires through holes in screw
collar.
5. Connect the fixture wires to the
supply wires.
6. Secure canopy with screw collar ring.
7. Install the bulb (Not included) in
accordance with the fixture’s
specifications. (DO NOT EXCEED
THE MAXIMUM WATTAGE RATING!)
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
CSA054608HAMR1
You will need 8 - Candelabra Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
Ø28"
30-1/4"