Installation Sheet

LIGHTING THE WAY FOR SIXTY YEARS
CRYST
WARNING:
Turn Power Off
Electrical Danger
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
RAMA
ASSEMBLY INSTRUCTION MODEL #5167-EB-CL-MWP
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
CSA526509RAMR1
You will need 9 - Candelabra Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
Ø24 1/4"
19"
A
B
C
D
Crystal Sets
A. 6 Set. 14mm*16+(14mm+38mm)*7
B. 6 Set. 14mm+18mm+14mm+76mm
C. 1 Set. 14mm+40mm
D. 24 Set. 14mm+38mm
C
A
B
Ø6 1/4"
1 1/8"
D
4pcs
B
How to Install
1. Screw short nipple into coupling on
top of fixture and secure with nut.
2. Place short tube , big check ring and
canopy over nipple and secure with
nut.
3. Screw long nipple into coupling on
bottom of fixture and secure with nut.
4. Install the bulb (Not included) in
accordance with the fixture’s
specifications. (DO NOT EXCEED
THE MAXIMUM WATTAGE RATING!)
5. Place long tube and small check ring
over nipple and secure with nut.
6. Place basket over nipple and secure
with nut.
7. Place cap over nipple and secure
with finial.
8. Hook crystal on the body as shown.
D
8pcs
D
2pcs