Installation Sheet

A:
2018/10
A
"
29"
"
33.5
10
MODEL#: 515-GA
ASSEMBLY AND DRESSING INSTRUCTIONS
You will need 8 Candelabra
bulbs.40 Watts recommended
60 Watts max.Bulb not
included.
USE LED FOR EXTENDED USE
5”
9
Assembly Instructions:
1)Pass wire through center rod
[1]and screw it into cluster
[2].Then through swivel[3],
2)Open the quick link , circled
[6] and screw collar[8]
together.
3)Screw the
top leaf assembly[4],fixture
loop[5] ,chain[6],last screw
[3 ]into[1].
[7]
threaded pipe[9]
from the canopy[10] inside
through the[10] and two
decorative metal leaves[11],
[12] into[8].Then pass wire
from [6] to [9].
4)Put over the metal band
ring[13] on the top of the
shade[14],open the clip in
the[15] to hold the bottom of
[14].
5)Take one of the decorative
chains[16],the top hanging
the hook[17],the bottom
hanging hook[18].The same
is true for the other two [16].
6)Put the candle sleeve[19] into
the socket, Insert
recommended bulb (not
applied).
7)Hang the metal ball”A” under
the [2].
6
10(5”) CANOPY
WIRE CONNECTOR
GROUND SCREW
MOUNTING BAR
5
11
17
7
8
12
13
15
19(W1”xH2”)
14
2
18
16(22”)
1
BULB(NOT INCLUDED)
4
3
10mm metal ball+60mm metal ball
3
/
4
"
WARNING: This product can
expose you to Lead, which is
known to the State of California to
cause cancer and/or birth defects
or reproductive harm. For more
information go to
www.P65Warnings.ca.gov