Installation Sheet

FIRST LEAF ASSEMBLY
SECOND LEAF ASSEMBLY
THIRD LEAF ASSEMBLY
FINIAL
FOURTH LEAF ASSEMBLY
FIXTURE WIRE
MOUNTING BAR
GROUND SCREW
OUTLET SCREW
WIRE CONNECTOR
CANOPY
MACHINE SCREWS
GROUND WIRE
INSULATION PAD
BALL NUTS
SOCKET SLEEVE
THREAD
LEAF ASSEMBLY
NOTICE: FOR REPLACING THE BULB, PLEASE UNSCREW THE LEAF ASSEMBLY AS SHOWN ABOVE
BY USING SLIGHT PRESSURE FLATTEN
THE LEAVES BY PUSHING THEM
IN A UPWARD DIRECTION.
MODEL#: 507-GA
ASSEMBLY AND DRESSING INSTRUCTIONS
All electrical components must be
Electrical Danger
Turn Power off
WARNING:
You will need 6 Candelabra
bulbs.40 Watts recommended
60 Watts max.
Bulb not
included.
*Due to the delicate of this design,you may need to manually bend the leaves as the
intended design is to have a smooth pattern of leaves.
WARNING: This product can
expose you to Lead, which is
known to the State of California to
cause cancer and/or birth defects
or reproductive harm. For more
information go to
www.P65Warnings.ca.gov
2018/11