Installation Sheet

Table Of Contents

31.5"

37"

ASSEMBLY INSTRUCTION MODEL #428-SA

Lower Frame

Upper Frame

Eyelet Screw

A.8 Pieces.

L100mm x W19mm

B.8 Sets.

(19)10mm

C.1 Set.

(1)10mm + (1)40mm

You will need 8 -Candelabra Base Bulb

40 Watts Recommended 60 Watts Max.

USE LED BULBS FOR EXTENDED USE

1.Do a complete inventory of all

parts and components before you

start installation.

2.Align the hole on the lower frame

with the upper frame and secure

them with the eyelet screw.

3.Place the candle sleeve onto the

socket, and insert recommended

bulb (not included).

4.Hang crystal“A” onto the eyelet

screw.

5.Hang crystal“B” onto the metal

ring of “A”.

6.Hang crystal“C” onto the bottom

of fixture.

PAGE 1
ASSEMBLY INSTRUCTION MODEL #428-SA Upper Frame 37" You will need 8 -Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE A B Lower Frame Eyelet Screw C 31.5" 1.Do a complete inventory of all parts and components before you start installation. 2.Align the hole on the lower frame with the upper frame and secure them with the eyelet screw. 3.Place the candle sleeve onto the socket, and insert recommended bulb (not included). 4.Hang crystal“A” onto the eyelet screw. 5.
PAGE 2
PART NUMBER MODEL #428-SA A B C D A. (1) - Mounting Hardware B. (1) - Canopy(W5.5",H1") #XRE423SACAN5.5IN C. (1) - Collar Ring D. (1) - Collar Loop E. (2) - Quick Link F. (1) - Hanging Chain(72",4mm) #XRE425SACHA4MM G. (1) - Fixture Loop H. (1) - Upper Frame I. (8) - Candle Sleeve(W0.87", H3.15") #XRE425SACDL3.15IN J. (1) - Lower Frame K.