Installation Guide

95 , 11590Cantiague Rock Road Westbury NY
ph:516.931.9090
fax:[phone]
[e-mail]
www. crystorama. com
MODEL#: 2245-PN
ASSEMBLY AND DRESSING INSTRUCTIONS
2014-11
IMPORTANT
TURN OFF THE POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX
BEF ORE STARTING INSTALLATION
1958
CRYST RAMA
You will need 4-Cand.BULB
40 watts Recommended
60 watts Max
Bulb not included
Spread the arms so that the arms
are at equal
distance from each other.
Make sure that the iron
tubes are assembled
straight relative to the
top and bottom ring
before tightening the
top screws and the
bottom finials.
Mounting bar
Outlet box screw
Ground screw
Lock washer
Hex nut
Nipple
Fixture ground wire
Outlet box
Wire Connector
Main wire
Main wire
Square ring
(big)
Canopy
Collar loop
Chain
Loop
Nipple
Collar ring
Arms
Nipple
(The screws from square ring (small))
Screws
(The screws from iron tubes)
Screws
Square ring
(small)
Shades
Iron tubes
Candle sleeve
Fixture arms
Screws
Bottom finials
Coupling
Pipe