User manual

Page 6 U S E R M A N U A L AUTOSAT 2 CONTROL
1.2 Safety considerations
For your protection, read the safety considerations carefully before you start running your
new equipment.
The manufacturer accepts no liability for damages arising from faulty handling and failure to
comply with safety provisions.
If the equipment has been modified, Crystop is no longer responsible for ensuring, that the
legal requirements (i.e. equipment and product safety laws, electromagnetic compatibility)
are complied with. On resale of the modified equipment, the person responsible for the
modification becomes the manufacturer and is liable accordingly. Furthermore the Crystop
Guarantee becomes inapplicable, which may lead to a loss of warranty rights.
AutoSat 2 is designed solely for installation and operation in motor vehicles and caravans.
The D+ conductor should always be connected.
The screws of the external unit should be checked regularly for tightness.
1.3 Important operating considerations
Installation location/ Ventilation
Like any electronic device, the AutoSat control unit produces heat. However the heat
produced is innocuous and is discharged effectively. Do not place any objects on the device.
Maintain a space of 5 cm above the device to allow the heat produced in the device to
discharge.
Do not place burning objects, i.e. burning candles on the device.
The rubber feet of the device may cause a colour change in treated furniture surfaces. If
necessary, place the device on an appropriate mat.
Supply voltage
Operate the control unit with a voltage of 12 to 14.4 V DC only. Never open the device. If
repair becomes necessary, it should be carried out be trained personnel.
Moisture
Protect the device from moisture, drips and splashes and do not place objects containing
liquids, i.e. vases on it.
Heat/Radiation
Do not place the control unit near a heating element or in direct sun light.
In the following cases disconnect the device from the power supply and ask an expert
for help:
> the device was subjected to moisture i.e. liquid got inside.
> on major malfunction.
> on major external damage.
WARNING:
In order to prevent damage to your vehicle roof, your AutoSat2 should not be
operated in high winds and gusts.