User manual

AUTOSAT 2 CONTROL U S E R M A N U A L PAGE 11
5 Handling the operating instructions
For the button names used in the following operating instructions you will find equivalent
symbols in the Quick reference (page 10) which are used on the buttons of the control unit.
e.g.:
On / Offbutton
In the text buttons are shown bold and in italics. e.g.: “On / Off“ button
The figures in the text are numbered (Fig. 1), to maintain a clear reference to the text. Your
display may vary if a different satellite is selected.
Menu texts are shown bold. e.g.: “Fine pos“
5.1 How to select a particular menu
By pressing the “Menu“ button you enter the Main menu.
With the “Plus or “Minusbutton you move the menu selection arrow (>) up or down until
the arrow points to the required function or the corresponding sub menu. After pressing the
“Enter“ button, the selected function is executed or the marked sub menu is called.
You leave Main menu by pressing the „Menu“ button again.
Fig. 1