User manual
Page 10 U S E R M A N U A L AUTOSAT 2 CONTROL
4 Operating instructions
4.1 Quick reference
Function Description Operation
Switch on
“On / Off“ button
The satellite system is switched on with the
”On / Off“ button on the control unit or on the
optional remote control unit.
Retract antenna
+ Switch off
“On / Off“ button
If the control unit is switched off (display off) the
“On / Off“ button is pressed twice - once to
switch the control unit on and another time to
retract the antenna and switch off. If the control
unit is already on (display on) the “On / Off“
button needs to be pressed only once.
Change Satellite
“Sat“ button
If the currently found satellite is not the one you
require, then a search for the next satellite is
initiated by pressing the “Sat“ - button.
AUSTRALIAN version: to take affect you
have to press down this button for longer
than five seconds.
Menu button
“Menu“ button
By pressing the “Menu“ button, the main menu
is displayed. All operating functions are called
via the main menu.
Inputs are saved by pressing the “Menu“
button again.
Minus button
“Minus“ button
The “Minus“ button goes one step back for
Menu selection or reduces input values by 1.
Plus button
“Plus“ button
The “Plus“ button goes one step forward for
Menu selection or increases input values by 1.
Enter
“Enter“ button
The “Enter“ button confirms a Menu selection.