Operating instructions

PAGE 16 OPERATING INSTRUCTIONS AUTOSAT 2
Station search: Add new stations
Satellite: For setting the satellite on which a station search is to be effected
(the satellite must have been preset in the above menu item. The aerial must be
tuned to the satellite).
Set transponder manually: Search for any stations on this set transponder,
for accurate selection of which stations will be saved during a search (for
instance English language only).
Add new stations: All stations available for reception on the set satellite will
be searched (including foreign language stations) and appended to the station
list.
Service Menu:
Service Information: For obtaining information of the DVB module, signal
amplitude and C/N.
Edit station lists: Transfer of station lists by serial interface, will only be
possible in the factory!
Start firmware download: will only be possible in the factory!
6.7 SOUND SETTING
Key sequence: MENU Display main menu
4x The arrow points at SOUND ->
OK Display SET SOUND menu:
, key: Select line
Press or key for setting BALANCE, TREBLE, BASES and LOUDNESS to
your personal taste.
STORE key: For permanent saving of a setting.