User guide

VPS-2300 User Guide
8 Safety Information
Important information
 To ensure maximum performance, please read this
manual carefully. Keep it in a safe place for future
reference.
 Install this unit in a cool, dry, clean place – away
from windows, heat sources, sources of excessive
vibration, dust, moisture and cold. Avoid sources of
humming (transformers, motors). To prevent fire or
electrical shock, do not expose the unit to rain or
water.
 Never remove the unit cover. Contact your dealer if
an object falls inside the unit.
 Do not use force on switches, controls or connection
wires. When moving the unit, first disconnect the
power plug and the wires connected to other
equipment. Never pull on the wires themselves.
 The openings on the unit cover assure proper
ventilation of the unit. If these openings are
obstructed, the temperature inside the unit will rise
rapidly. Therefore, avoid placing objects against
these openings, and install the unit in a well-
ventilated area to prevent fire and damage.
 Be sure to allow a space of at least 30 cm behind,
20 cm on the both sides and 10 cm above the top
panel of the unit to prevent fire and damage.
 The voltage selector on the rear panel of this unit
must be set for your local main voltage BEFORE
plugging into the AC main supply. Voltages are
110/120/220/240 V AC, 50/60 Hz.
 The voltage used must be the same as that
specified on this unit. Using this unit with a higher
voltage than specified is dangerous and may result
in fire or other accidents. PIXEL MAGIC SYSTEMS
LTD. will not be held responsible for any damage
resulting from use of this unit with a voltage other
than specified.
 Digital signals generated by this unit may interfere
with other equipment such as tuners, receivers or
TVs. Move this unit farther away from such
equipment if interference is observed.
 Do not attempt to clean the unit with chemical
solvents; this might damage the finish. Use a clean,
dry cloth.
 Be sure to read the “TROUBLESHOOTING” section
regarding common operating errors before
concluding that the unit is faulty.
 When not planning to use this unit for long periods
of time, disconnect the AC power plug from the wall
outlet.
 To prevent lightning damage, disconnect the AC
power plug when there is an electrical storm.
 Grounding or polarization – Precautions should be
taken so that the grounding or polarization of an
appliance is not defeated.
 This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this unit itself is turned off. This state is called
the standby mode. In this mode, this unit is designed
to consume a small amount of power.