User guide

VPS-2300 User Guide
6 Troubleshooting
No LEDs displayed (including power)
 Check that the unit is connected to a working mains
supply, and that it is switched on.
Power LED is On, but no other LEDs shown / LCD
not showing a display
 Check options [Backlight] and [LEDs] have not been
de-activated.
►
No picture is displayed
 Ensure that Crystalio is switched on.
 It may take up to 1 minute for Crystalio to complete
its initialization process before the video can be
displayed.
 Ensure correct video input has been selected and
that is correctly cabled and the video source is
active.
 Ensure the source video is of correct format. Refer
to Section 5.6 System Config for more information.
Picture is displayed but is unstable
 Check cabling, particularly that the cable providing
video sync is connected correctly.
Picture appears stretched
 Ensure that the aspect ratio of the video source
material, video source device and Crystalio are all
correctly set.
VP SET UP
Input Select
Aspect Ratio
Video Settings
> Advanced
System Config
AR Profile
Video Profile
Pixel Magic
ADVANCED
True Life
Zoom
Position
Crop
Film Detect
> Back Light
> LEDs
Hide Input
Firmware Upgd