User guide

VPS-2300 User Guide
System
Config
Available modes
DVI
PassThr
This is for using HDTV DVI input. User can
select this option to enable DVI pass through
such that no scaling will be performed by
Crystalio. The input video source to Crystalio
will be directly outputted to the display device.
On
Enable DVI Pass Through
Off
Disable DVI Pass Through
Hardware
Reset
This option resets all Crystalio hardware
settings. All saved options will be cleared.
Factory
Setting
This option sets Crystalio back to factory
defaults. The default factory settings are as
follows:
1. Input Select
SDI 1
2. Aspect Ratio
Same as Screen
3. Video Settings
Brightness = 0
Contrast = 0
Color = 0
Hue = 0
Sharpness = 0
R Offset = 0
G Offset = 0
B Offset = 0
R Gain = 0
G Gain = 0
B Gain = 0
Black Enhancer = Natural Black
Voltage Pump = Off
4. Advanced
DCDi = On
De-interlace = Auto
Noise Reducer = Off
True Life ► all Effects = 0
True Life ► all Threshold = 0
Zoom = Best Fit
Position = 0,0
Crop ► Left, Right, Top, Bottom = 0
Film Detect = Normal Wnd
NLS Config – Crop to Fit = 2
NLS Config – Center Shape = 2
Back Light = Active
LEDs = Active
Hide Input ► all Input Terminals = Show
System
Config
Available modes
Factory
Setting
(Cont’d)
5. System Config
Input Format ► all standard definition (SD)
video input terminals = SDTV
Input Format ► all hi-definition (HD) video
input terminals = HDTV
Output Selection = DVI
Resolution = 1024 x 768
Output Format = undefined (Output is set
to use exact resolution)
DynaVout = not effective
H-Sync/V-Sync = 0,0
Screen A.R. = Map Resolution