User guide

VPS-2300 User Guide
System
Config
Available modes
Output
Format
(cont’d)
1050p@60Hz
1050 Hi-Definition (HD) progressive video
1080i@50Hz
1080 Hi-Definition (HD) interlaced video with
50Hz refresh rate
1080i@60Hz
1080 Hi-Definition (HD) interlaced video with
60Hz refresh rate
1080p@60Hz
1080 Hi-Definition (HD) progressive video
1152p@50Hz
1152 Hi-Definition (HD) progressive video
(1440x1152)
720p@60Hz(1)
720 Hi-Definition (HD) progressive video but
with different timing as before
1080i@59.94(1)
1080 Hi-Definition (HD) progressive video but
with different timing as before
720p@50Hz
720 Hi-Definition (HD) progressive video
720p@50Hz(1)
720 Hi-Definition (HD) progressive video
but with different timing as before
Set Refresh Rt
If your display does not match the pre-defined
refresh rate settings, you can enter the
parameters here to match Crystalio exactly to
its characters.
Choose from following options:
• @24
• @25
• @30
• @48
• @50
• @59.94
• @60
• @72
• Customize
Note: Before you modify these settings, it is
important that you check the capabilities of the
display device. Incorrect settings might cause
permanent damage to your display. If you are
in any doubt, contact your display
manufacturer / dealer for advice.
System
Config
Available modes
Output
Format
(cont’d)
Customized Timing
The customized timing will store the user
defined timing. The timing will be stored
even user turn off Crystalio
 Apply
Apply the current selected customized
timing
 Edit
Change the customized timing detail.
The procedure is same as Customize
 Delete
Delete the current customized timing
Note: If current customized timing is in
use or used by DynaVOut, this
customized timing cannot be deleted.
 Rename
Rename the customized timing
Note: User can store up to 50
customized timing in Crystalio
DynaVOut When activated, Crystalio will set the output
video format dynamically based on the input
video.
When NTSC IN
Options:
• Resolution
• Format
Output Resolution or Format will change
automatically when input format is 480i (NTSC)
When PAL IN
Options:
• Resolution
• Format
Output Resolution or Format will change
automatically when input format is 576i (PAL)