User guide

24
5 Expert Configuration
5.6 – System Config
The settings in this section are used during the initial
installation and setup. These settings include defining
the display device parameters, connection types etc.
Setup
►
System
Config
►
select appropriate
setting from list
Available Modes
System
Config
Available modes
Input
Format
If [SDTV Input] is selected, the following input
formats are available:
 SDTV
Standard Definition video – with auto format
selection (NTSC or PAL)
 480i (NTSC)
480 interlaced NTSC video
 576i (PAL)
576 interlaced PAL video
If [S-Video Input] or [Video Input] is selected,
the following input format is available:
 PAL60
PAL 60 video
System
Config
Available modes
Input
Format
(cont’d)
If [HDTV Input] is selected, the following input
formats are available:
 480p (NTSC)
480 progressive scan NTSC video
 576p (PAL)
576 progressive scan PAL video
 720p
720 Hi-Definition (HD) progressive scan
video
 1080i@50Hz
1080 Hi-Definition (HD) interlaced video with
refresh rate 50 frames per second
 1080i@60Hz
1080 Hi-Definition (HD) interlaced video with
refresh rate 60 frames per second
 800x600p
Video source of 800x600 resolution
 1024x768p
Video source of 1024x768 resolution
 1280x1024p
Video source of 1280x1024 resolution
 HDTV
Hi-Definition (HD) video – with auto format
selection
Note: If the input format is incorrectly set, no
image will be displayed
System
Confi
g
Available modes System
Confi
g
Available modes
SETUP
OK
VP SET UP
Input Select
Aspect Ratio
Video Settings
Advanced
> System Config
AR Profile
Video Profile
Pixel Magic