User guide

VPS-2300 User Guide
Advanced Available modes
Back Light Crystalio can black out the LCD display to avoid
LCD back light affecting video viewing.
On
The LCD is illuminated whenever Crystalio is
running (i.e. not in standby mode)
Active
The LCD is illuminated whenever the Crystalio
settings are being accessed (such as menu is
being selected). After a short period of
inactivity, the illumination will switch off
automatically.
Off
The LCD backlighting is disabled.
LED Similar to LCD back light, the LEDs on the front
panel can be blacked out.
Active
The LEDs are illuminated to show the current
status
Off
The LEDs are disabled
Note: the Power LED cannot be disabled.
Hide Input Crystalio has a comprehensive set of input
connections. For ease of use it may be more
convenient to remove any unused inputs from
the menu selections. For example, if you are
not using Composite video connections, then
by hiding these inputs it reduces 8 items from
the input menu.
Setup
► Advanced ► Hide Input
 Select which input to hide from the list
 Select either Hide or Show as required
Note: The current input cannot be hidden.
Advanced Available modes
Remap
Button
On Crystalio remote control, there are no “16:9
Letter Box” nor “Toggle D/A” buttons. User can
redefine some buttons to perform these
operations.
16:9 Letter Box
 N/A : default
 2:35:1 : [2.35:1] button is replaced with
[16:9 LetterBox] function
Toggle D / A
 N/A : default
 LED ACTIVE : [LED ACTIVE] button is
replaced with [Toggle D/A] function
 LED OFF : [LED OFF] button is
replaced with [Toggle D/A] function
 LCD ON : [LCD ON] button is
replaced with [Toggle D/A] function
 LCD ACTIVE : [LCD ACTIVE] button is
replaced with [Toggle D/A] function
 LCD OFF : [LCD OFF] button is
replaced with [Toggle D/A] function
Firmware
Upgrade
This allows the Crystalio internal software to be
updated, either from a USB thumb disk, or via
the network connection.
For detailed instructions, please refer to
http://www.crystalio.com/support.html
SETUP
OK