User guide

VPS-2300 User Guide
5 Expert Configuration
5.5 – Advanced
The settings introduced in this section allows Crystalio
to be configured to suit complex environments,
enabling you to configure many of the Faroudja video
processing options to maximize the picture quality.
Note: The DCDi®, De-interlace and Noise Reducer will be
hidden in this menu if HDTV input has been selected.
Setup
► Advanced ►
select appropriate
advanced setting
Note: Use Navigation Buttons on the front panel to set up:
Available Modes
Advanced Available modes
DCDi® Faroudja developed DCDi® (Directional
Correlational De-interlacing) technology to
eliminate the jaggedness that conventional up-
converters introduced to diagonal edges in
video. DCDi®’s unique algorithm identifies all
the moving edges in a scene and adjusts the
angle of interpolation at each pixel so that the
interpolation always follows the edge instead of
crossing it, eliminating stair-casing or jagged
edge artifact, to produce a smooth and natural
looking image.
On
Activate DCDi® de-interlacing
Off
Deactivate DCDi® de-interlacing
Deinterlace Auto
Crystalio will automatically select the most
appropriate de-interlace method. The method
selected can either be
• DCDi®
• Film 3:2 Pulldown
• Film 2:2 Pulldown Even (PAL only)
• Film 2:2 Pulldown Odd (PAL only)
Video
DCDi® de-interlacing only
NTSC@30 On
Crystalio will automatically select the most
appropriate de-interlace method. The method
selected can either be
• Film 3:2 Pulldown
• Film 2:2 Pulldown Even (NTSC/PAL)
• Film 2:2 Pulldown Odd (NTSC/PAL)
• DCDi®
2:2 Even
Film 2:2 Pulldown Even
2:2 Odd
Film 2:2 Pulldown Odd
Note: If DCDi® is switched off in the
Advanced menu setting, simple video
de-interlace will be used instead of
DCDi
SETUP
OK
HDTV Video Scaler/Proc
e
SDI
Serial Digital Interface
SETUP
OK CANCEL
Pixel
Magic
decrease
value
increase
value
confirm
selection
cancel
selection
VP SET UP
Input Select
Aspect Ratio
Video Settings
> Advanced
System Config
AR Profile
Video Profile
Pixel Magic