User guide

18
5 Expert Configuration
5.4 – Video Settings
Crystalio allows you to configure the appearance of the
video being displayed with a range of parameters.
Setup
►
Video
Settings
►
select appropriate
setting from list
Note: Use Navigation Buttons on the front panel to
set up:
Available Modes
Video
Setting
Function Available
range
Brightness Adjusts display brightness -999 to 999
Contrast Adjusts display contrast -18 to 14
Colour Adjusts display colour saturation -99 to 99
Hue Adjusts display hue -180 to 180
Sharpness Adjusts display sharpness
Note: This setting is same as
adjust TrueLife Luma Edge Eff.
0 to 100
R Offset Adjusts Red element of display
saturation
-999 to 999
G Offset Adjusts Green element of display
saturation
-999 to 999
B Offset Adjusts Blue element of display
saturation
-999 to 999
R Gain Adjusts Red gain -99 to 99
G Gain Adjusts Green gain -99 to 99
B Gain Adjusts Blue gain -99 to 99
Black
Enhancer
Black Enhancer improves black
level details
Natural
Black /
Enhanced
Black
Voltage
Pump
Voltage Pump drives analogue
output voltage up
Note: This setting is available
when analogue output is
selected.
On / Off
SETUP
OK
HDTV Video Scaler/Proc
e
SDI
Serial Digital Interface
SETUP
OK CANCEL
Pixel
Magic
decrease
value
increase
value
confirm
selection
cancel
selection
increase value in
increments of 10
decrease value in
increments of 10
VP SET UP
Input Select
Aspect Ratio
> Video Settings
Advanced
System Config
AR Profile
Video Profile
Pixel Magic