Full Product Manual

Page 17
12. Date / Time Setup
1. Right click on the mouse to bring up the main menu.
2. Click “System setup” > “General Setup” > “Time Setup”
3. If you have the NVR connected to the internet you may check the “Sync Time” to
automatically sync the correct time.
4. If you do not like to sync time or have issue with internet you can uncheck “Sync
Time” and manually setup the time
5. Select the “Time Zone” > “Date Format” > “System Date” > “System Time”
6. Once you have it set click “Ok” to save and exit
13. Display Setup
1. Right click on the mouse to bring up the main menu.
2. Click “System setup” > “General Setup” > “Screen Setup”
3. If you are using built-in screen we recommend using screen resolution of
“1024x768”
4. If you are using external monitor using the HDMI out you may change the
resolution depends on the resolution supports by the monitor.
5. Once you have the right resolution and everything is displaying correctly on the
screen click “Ok” to save and exit
Note: If you setup the “VGA resolution” to higher resolution for built-in monitor the
screen will get cut off or may not be adjust correctly. In case like this just go back to
the “Screen setup” and change the “VGA resolution” back to 1024x768, and click “Ok”
to save and exit.