Instructions / Assembly

● Please avoid proximity to ears. The extremely loud 130 decibel alarm may harm your hearing.
● Do not let children play with this alarm lock.
● Do not use near animals.
INSTALL BATTERY
HOW TO LOCK & SET THE ALARM
Padlock User Manual
WARNING!
1. Unlock the padlock.
2. Remove the component lid by loosening the set screw
inside the locking hole.
3. Take out the battery compartment.
4. Open the waterproof lid.
5. Install the CR2 lithium battery.
6. Reassemble the parts.
screw
CR2 Battery
waterproof lid
* Make sure the waterproof lid is firmly closed to ensure
that waterproofing is not affected
1. To Activate the alarm function, insert the key into the key barrel and rotate anti-clockwise.
You will hear One Beep. After 5 seconds, the siren will sound a single long beep to confirm the
alarm is armed.
2. Close the shackle until it clicks into place.
3. If the lock is hit or shaken, the siren will emit five rapid beeps as a warning.
● If further movements are not detected within 5 seconds, the alarm will rearm automatically.
● If the lock is continuously attacked, the siren will burst out a 130dB alarm for 10 seconds. The
above process will repeat until no movement is detected.
4. You may stop the alarm by unlocking it.
5. To Deactivate the alarm function, insert the key into the key barrel and rotate anti-clockwise twice
to lock. The siren will sound TWO Beeps to confirm the alarm is disarmed.
ALARM ON Single beep ALARM OFF Double beeps
Model: BP12A
Blackstone 12mm Padlock