User Manual

03
04
Transmitter 7072 Interface Introduction
1. Link indicator:
3. Digital LED:
5. Mode button:
Short press for audio switch; press and hold (3s) for code pairing.
Software Upgrading
Connect to a HD source device that supports HDMI output.
SONY NP-F970 and compatible battery series
11. DC IN：
Video indicator
Digital LED
CH button Mode button
Mini USB
HDMI In
Battery interface
DC IN
Audio input
interface (3.5mm)
Antenna interface
Structure & Interface
Transmitter:7072
Link indicator
Battery interface
Power
ON/OFF
Battery
interface
Used to indicate the network working status of the product.
Used to indicate the video transmission working status of the product.
2. Video indicator:
Used to display the current working status and working channel
of the transmitter.
4. CH button:
a: Short press to switch the frequency(channels) channel;
b: Press and hold (3s) to turn on / off the fan.
6. Mini USB:
7. HDMI interface:
8. Battery interface:
9. Power switch:
ON / OFF
10. Audio input interface (3.5mm):
Connect to an active microphone.
This port is connected to a power adapter or other DC power sources
(such as battery pack, etc.).(SPEC: 5.5mm )