User Manual

11
12
VIDEO indicatorLINK indicator
Decimal point
LED and Indicator
Transmitter / Receiver
LED display
Normal mode: LINK indicator and VIDEO indicator are on red.
RTSP mode: LINK indicator and VIDEO indicator are on yellow.
LINK indicator and VIDEO indicator flicker slowly:
no wireless connecting between the transmitter and the receiver
LINK indicator is on and VIDEO indicator flicker slowly:
wireless connecting is ready and no video transmission
LINK indicator and VIDEO indicator are on: video transmission is normal
LINK indicator and VIDEO indicator flicker quickly: low battery alarm
LED display: frequency channel 1~9, A(10), b(11)
Decimal point(Transmitter):
light is on – audio input via line in
light is off – audio input via HDMI
channel1. Set the transmitter and receiver to the same frequency .
TX: DSLR camera + 7072
RX: Monitor + 3072
3. Connect the receiver with the monitor by HDMI cable.
2. Connect the transmitter with the DLSR by HDMI cable.
Application Case
4. Turn on the receiver and monitor power, and LINK indicator light begins
to flicker that indicate the wireless connection between the transmitter
and the receiver is in progress.