User Manual

09
10
3072 Wireless HD Receiver
Installation Instructions
1. Install the antennas on the receiver,
turn it clockwise, and tighten the antennas.
Adjust the direction of two antennas to make
them in a fan shape with 90 degree angle
(as shown in the figure).
3. Install the receiver on the monitor. Connect the HDMI cable.
Turn on the power (receiver and monitor power).
Warning: When the device is not in use, remove the battery.
HDMI OUT
Standard HDMI interface
HDMI connecting cable
HDMI IN
Standard HDMI interface
90
Battery
2.If using battery, equip to the receiver.
As shown in the figure below