SWIFT 800 HDMI Wireless Video Transmission SHENZHEN CRYSTAL VIDEO TECHNOLOGY CO.,LTD USER MANUAL ADD: F12, F518 Idea Land, Baoyuan Road, Baoan Central Area,Shenzhen, China Post code：518102 Fax: +86-755-29188427 Tel: +86-755-27750518-6652 www.cv-hd.com E-mail: Sales@cv-hd.com E-mail: Marketing@cv-hd.com This user manual applies to: Transmitter: 7072 Receiver: 3072 Version: 2.0 2019.09.
Optimal range between transmitter and receiver is between 1 meter and 30 meters with in line of sight indoor
CONTENTS Foreword 01 Brief Introduction 01 Features 01 Packing List 02 Structure & Interface 03 The Transmitter 7072 03 The Receiver 3072 05 Product Installation 07 Digital Tube Status Indication 11 Operating Instructions 12 Application Case 13 Product Specifications 15 Troubleshooting 16
Foreword - Please read this manual carefully before you use this product and retain it properly for future reference - If there is any doubt or difficulty in the process of product usage, please feel free to contact us or the dealer. - The company reserves the authority to amend the specification.
Transmitter 7072 Interface Introduction Structure & Interface 1. Link indicator: Used to indicate the network working status of the product. Transmitter:7072 2. Video indicator: Link indicator Video indicator Antenna interface Used to indicate the video transmission working status of the product. 3. Digital LED: Used to display the current working status and working channel of the transmitter. Digital LED CH button Mini USB 4.
Receiver 3072 Interface Introduction Receiver:3072 1. Link indicator: Used to indicate the network working status of the product. Link indicator Video indicator Antenna interface 2. Video indicator: Used to indicate the video transmission working status of the product. 3. Digital LED: Used to display the current working channel of the receiver. Digital LED CH button Mini USB Mode button 4.
Product Installation 3. The transmitter is mounted on a SLR camera and rotated clockwise. Connect the HDMI interface of the transmitter to the HDMI interface of the 7072 Wireless HD Transmitter Installation Instructions SLR camera via the HDMI cable (as shown in the figure). 4. Turn on (SLR camera, and transmitter) the power. 1. Install the antennas on the transmitter, 90 turn it clockwise, and tighten the antennas.
3072 Wireless HD Receiver Installation Instructions 3. Install the receiver on the monitor. Connect the HDMI cable. Turn on the power (receiver and monitor power). 1. Install the antennas on the receiver, turn it clockwise, and tighten the antennas. 90 Adjust the direction of two antennas to make them in a fan shape with 90 degree angle (as shown in the figure). 2.If using battery, equip to the receiver.
Application Case LED and Indicator Transmitter / Receiver 1. Set the transmitter and receiver to the same frequency channel . LINK indicator VIDEO indicator 2. Connect the transmitter with the DLSR by HDMI cable. 3. Connect the receiver with the monitor by HDMI cable. LED display Decimal point LED display: frequency channel 1~9, A(10), b(11) Decimal point(Transmitter): light is on – audio input via line in light is off – audio input via HDMI Normal mode: LINK indicator and VIDEO indicator are on red.
5. Waiting for 25-35 seconds, LINK indicator is on, and the connection between the transmitter and the receiver is built successfully 6. Waiting for 7 seconds, VIDEO indicator is on, the monitor displays the live video from DSLR. If the transmitter and the receiver work under RTSP mode, user can use smartphone /pad for connecting to the transmitter by Wi-Fi, and can start App for monitoring live video from DLSR.
Troubleshooting TV OSD Display connecting to transmitter Link up with transmitter Please check video soucre Image TV has no signal input TV has blank screen without any display TV screen color is abnormal 15 Issue Solution Turn on the transmitter power. The transmitter or receiver is not placed upright. Insert the transmitter or receiver into the base and keep it upright. The distance between the receiver and the transmitter is too far.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
