Quick Start Guide

BeamLink-Ultimate
All-in-one Wireless Transmission
Video + Intercom + Control Signals
Full HD
High Definition
Ultra Low
Latency
Streaming
IP
Band
5GHz
4
Camera
Range
500m
Intercom 4
*
ALL-IN-ONE
Specifications
Transmitter*4 Receiver
Antenna Mode
4x4 MIMO and Beamforming
Transmission power
Receiving Sensitivity:-70dBm
Complete Cable-free Four-Camera Transmission:
1080p60 video + voice intercom +Tally+ RS232/422/485 control signals
High spectrum efficiency: transmits 4 channels video, data, voices and
control signals in just one RF channel
Support SDI+HDMI inputs and outputs, widely adapt to various
types of cameras, switch consoles
Support full-duplex voice intercom
DFS Certified
Up to 500m/1600ft transmission range (LOS)
The receiver supports RTSP streaming
BeamLink-Lite
2-channel
video
Full HD
High Definition
Ultra Low
Latency
Band
5GHz
Range
200m
(Tower type)
(Rack type)
Operating
Frequency
5.1~5.8GHz
Features
Support 2-camera wireless video transmission
Up to 200m/650ft transmission range (LOS)
Optional receiver design: Tower type and Rack type
Support HDMI and SDI outputs, widely adapt to various
types of switch consoles
Support Sony NP-F DV battery
Specifications
Transmitter*2
Receiver
Antenna Mode
2T2R MIMO & 5dBi external antenna
Video
Resolution
720p50/59.94/60,
1080p23.98/24/25/29.97/30/50/59.94/60, 1080i50/59.94/60
Video Port
HDMI*1
HDMI*2, SDI*2
Operating
Voltage
7~17V
Transmission
Distance
200m/650ft（video code rate: 10Mbps per channel）
Power
Consumption
≦6W ≦13W
Audio Format
PCM
Ultra-low video transmission latency (70ms)
Up to 1080p60Hz resolution
Operating Frequency
5.1~5.8GHz
17dBm
Input/Output
HDMI, 3G-SDI, Tally, RS232 or RS422
7~17V
Operating voltage
RS232 or RS422, Tally*2, HDMI*2, 3G-SDI*2, RJ45
Headphone & Mic
2*3-pin 3.5mm port
Headphone impedance
8~600ohm
Mic impedance
2K
Volume gain
30dB
Frequency response
550Hz ~ 3.6KHz +/-3dB
Transmission Distance
10W
Power Consumption
20W
Up to 500m
PCM, MPEG-2
Audio Format